Router Bits 2017-06-30T04:14:50+00:00

BAD DOG ROUTER BITS
​POWER THROUGH WOOD AND MORE!

What’s this dog got under his collar? Bad Dog Router Bits are made with the same quality carbide mixture as our Bad Dog Multi-Purpose Drill Bits. Use Bad Dog Router Bits for wood of course, but don’t stop there… solid surface, soapstone, cultured marble, and quartz surfaces can all be routed with these high quality bits.

BUY IT

DISCOVER ALL YOU CAN DO WITH BAD DOG ROUTER BITS

USE BAD DOG ROUTER BITS FOR WOOD OF COURSE, BUT DON’T STOP THERE…

  • Solid Surface
  • Soapstone
  • Cultured Marble
  • Quartz Surfaces

…can all be routed with these high qualitiy bits. Plus our Router bits have an anti-kickback design that’s usually found on bits costing $100’s more – but what else would you expect from Bad Dog Tools?

CHECK OUT BAD DOG TOOLS ON TV

LIFETIME GUARANTEE

We will repair or replace damaged or dull Router Bits.

Please return the Router Bits, the serial number which can be found on the box, along with $5 USD per bit for return shipping and handling.

If sending via USPS:
Mail to PO Box 851
Bristol, RI 02809

If sending via UPS or FEDEX:
Send to 24 Broadcommon Rd
Bristol, RI 02809

Note: Weight constraints limit replacement of Router Bits to mail only. They cannot be replaced at trade shows.

LIFETIME GUARANTEE

Download INSTRUCTIONS

Watch videos at the
Video Library

E-mail us at:
topdog@baddogtools.com

Give us a Bark at: 
800.252.1330

We are here from
9am to 5pm M-F

OR Check out a LIVE Demonstration at a
Trade Show near YOU!

WHAT’S THIS DOG GOT UNDER HIS COLLAR?

Bad Dog Router Bits are made with the same quality carbide mixture as our Bad Dog Multi-Purpose Drill Bits. Use Bad Dog Router Bits for wood of course, but don’t stop there… solid surface, soapstone, cultured marble, and quartz surfaces can all be routed with these high quality bits. Plus our Router bits have an anti-kickback design that is usually found on bits costing $100’s more – but what else would you expect from Bad Dog Tools?

GENERAL TIPS

  • Always feed material against the rotation of the router bit
  • Always take appropriate precautions to ensure safe operation of handheld router or router table
  • Always take care when working with router bits at slow speeds to be sure the material you’re working on is secure

ROUTER BIT MAINTENANCE

Remember that sharper bits cut better. Router Bits have an intricate cutting edge making them susceptible to chipping. Store your Bad Dog Router Bits in the custom designed carrying box. An occasional coating of light oil will prevent the bits from rusting. Carefully remove rust with steel wool.

IT’S ALL IN THE TECHNIQUE

WOOD
Use any router. If using an adjustable router, adjust the speed depending on the hardness of the wood; the harder the wood, the slower the speed. Always feed with the grain of the wood. Going against the grain will cause the wood to chip.
SOLID SURFACE
A variable speed router running at a slow speed (10,000 RPM +/-) is best for this material also known as Corian, Surell, and others. Cutting too fast might cause the edge to ripple. If you’ve never tackled this stuff before, practice on a scrap piece first!
QUARTZ, SOAPSTONE, CULTURED MARBLE
For best results, use a variable speed router set to the slowest speed. Make narrow passes – about four to five when you would normally take one on a piece of wood. When using a router at slow speeds, be sure the work piece is secure.

CHECK OUT THESE ROVER BITS VIDEOS

Welcome to our New Website! Any questions? Please call us toll free at 1.800.252.1330 Dismiss