6″ Handi Disc II Flange – Flush Grinding and Cutting Wheel
The 6″ HDII Flange takes the legendary Hands Disc cutting, sanding, and grinding wheel and makes it even better. The flange attachment allows the HDII to be used FLUSH for GRINDING and SANDING to Grind down welds, remove bondo, and sanding flat a concrete pad. The Flange adaptor screws onto any standard 5/8-11 grinder spindle. Just like the standard HDII, the surface and edges of the wheel are covered with over six carats of 46 grit diamond. At ten on the Mohs scale diamond wins every contest! Put the HDII up against almost any material and it will CUT, SAND, or FLUSH GRIND its way through. Use on Steel, Aluminum, Granite, Porcelain, Concrete, even soft materials like PVC and plastic without loading up the wheel.
More than anything,the Handi Disc II is designed to be safe. The steel core won’t shatter and explode like conventional fiberglass wheels.
CUT, SAND, AND FLUSH GRIND with the same wheel. Diamond is applied to the surface and edges for ultimate versatility.
Use on almost any material material from masonry to metal, and pvc to porcelain
6″ wheel diameter drastically increases cutting speed, and reduces grinding time
Covered in over 10 carats of 46 grit diamond for ultimate wear resistance – compared to less than a carat on most other diamond cutting wheels
Safe! Steel core means the wheel won’t explode like a fiber glass wheel if it binds up when cutting
Lifetime guarantee. If you wear out or damage this wheel we will replace it, no questions asked
5/8-11 thread flange threads onto almost any grinders spindle.
POWERTOOL/Angle Grinder/Bench Grinder NOT INCLUDED